The WARN 9.5ti is 9500 lbs. of pulling capacity packed into a massive aluminum die-cast body. Sealed for extreme-duty water-resistance and powered by a new generation Bosch motor and controlled by WARN's first thermometric indicator that gives the operator motor operating temperature information. The thermometric indicator LED on the new handheld remote provides instantaneous operator feedback on motor temperature.
Wireless Remote Control System can be added which is also available separately.
Limited Lifetime Warranty.
| 9.5ti SPECS/PART NUMBERS |
| Part Number: PN 67550 (12V DC) |
| Rated Line Pull: 9500 lbs. (4310 kgs.) single-line |
| Motor: Gen II, Series Wound™ |
| Remote Control: Remote switch, 12' (3.7m) lead |
| Geartrain: 3-Stage Planetary |
| Gear Ratio: 156:1 |
| Lubrication: Aeroshell #17 |
| Clutch (freespooling): Sliding Ring Gear |
| Brake: Automatic Direct Drive Cone |
| Drum Diameter/Length: 2.5"/9.0" (6.4cm/23cm) |
| Weight: 89 lbs. (36.3kgs.) |
| Wire Rope: 125', 5/16" diameter (30m, 8mm diam.) |
| Fairlead: Roller |
| Recommended Battery: 650 CCA minimum for winching |
| Battery Leads: 2 gauge, 72" (1.83m) |
| Finish: Chromate with high-gloss powder coat |
| Nuts/Bolts: PN 39570 |
|
| 12V DC PERFORMANCE SPECS |
Line Pull Lbs.(Kgs.) |
Line Speed FT./min(M/min.) |
Motor Current |
Pull by layer layer/Lbs(Kgs.) |
| 0 |
62(18.9) |
47 amps |
1/9500(4313) |
| 2000(910) |
16.3(4.97) |
160 amps |
2/8650(3927) |
| 4000(1810) |
11.8(3.60) |
230 amps |
3/7920(3595) |
| 6000(2720) |
9.31(2.84) |
305 amps |
4/7400(3359) |
| 8000(3630) |
7.59(2.31) |
370 amps |
5/6940(3150) |
| 9500(4310) |
6.67(2.03) |
425 amps |
|
|
| |
| Above performance specs are based on first layer of drum |
|
Winch Dimensions: 23.1" L. x 6.3" D. x 10.0" H. (587mm L. x 160mm D. x 254mm H.) |
| Mounting Bolt Pattern: 10.0" x 4.5" (254mm x 114.3mm) |