This item has an additional $19.99 shipping surcharge. SJ Part: 92104.0010 Vendor Part: 87800
Compact. Tough. An outstanding value for trucks, sport utility vehicles and Jeeps. The M8000, with its 4.8-hp Series Wound motor and 3-stage planetary geartrain, packs 8,000 lbs. of pulling power to get the job done. Available with 100' Spydura Synthetic rope and hawse fairlead. Pulls a fast 8 ft. per minute at rated load.
Wireless Remote Control System can be added which is also available separately.
Limited Lifetime Warranty.
Install Time:1-2 Hours Installation Instructions:Download PDF
Warn winch mount required for installation.
Fits these Vehicles
Universal Fit - This part will fit most vehicles. Some universal fit products require that you select a specific size or style, based on the actual features on your vehicle.
100', 3/8" Spydura™ Synthetic Rope with Hook and Protective Sleeve
12V 4.8 hp Series Wound Motor
Remote switch, 12' (3.7m) lead
Spring- loaded control switches
Automatic Direct Drive Cone Brake
3-Stage Planetary with a 216:1 ratio
Sliding Ring Gear Clutch for freespooling
Contactor Control Box
Color-coded 2 gauge, 72" cables and connectors.
M8000-M8000-s SPECS/PART NUMBERS
Part Number: 26502 (wire rope, 12V), 88502 (wire rope, 12V, CE, International sales only), 265032 (wire rope, 24V), 87800 (synthetic rope, 12V, currently not CE compliant
Rated Line Pull: 8000 lbs. (3630 kgs.) single-line
Motor: 12V 4.8 hp, Series Wound™
Remote Control: Remote switch, 12' (3.7m) lead
Geartrain: 3-Stage Planetary
Gear Ratio: 216:1
Lubrication: Aeroshell #17
Clutch (freespooling): Sliding Ring Gear
Brake: Automatic Direct Drive Cone
Drum Diameter/Length: 2.5"/9.0" (6.4cm/23cm)
Weight: 55 lbs. (25 kgs.)
Rope: Spydura™ synthetic -- 100', 3/8" diam.
Fairlead: Full radius polished aluminum hawse
Recommended Battery: 650 CCA minimum for winching
Battery Leads: 2 gauge, 72" (1.83m)
Finish: Argent Gray Powder Coat
Nuts/Bolts: PN 39625
12V DC PERFORMANCE SPECS
Line Pull Lbs.(Kgs.)
Line Speed FT./min(M/min.)
Pull by layer layer/Lbs(Kgs.)
Above performance specs are based on first layer of drum
Winch Dimensions: 21.04" L. x 6.3" D. x 7.6" H. (534mm L. x 160m D. x 193mm H.)
Mounting Bolt Pattern: 10.0" x 4.5" (254mm x 114.3mm)
1995-2013, Savanna Jones. All rights reserved. The name Savanna Jones and SavannaJones.com logo's are trademarks of Savanna Jones Inc.
This entire site with its content is copyright protected. Images are watermarked and cannot be used without explicit agreement from Savanna Jones Inc.
Throughout this web site all the preceding marks & logos are used for identification purposes only. Savanna Jones Inc has no affiliation with Toyota. It is not implied that any part listed is a product of, or approved by Toyota.